How to Paint Kitchen Cabinets?

paint kitchen cabinets

Kitchen cabinets are the essential components of every home, affecting the overall design and aesthetics. Thus, any homeowner should match their cabinets with their interior design. Although various durable wood materials are available for the kitchen cabinets, the paint finish can wear or tear over time. Instead of replacing the whole set with new products, which can cause a considerable amount of money, it is better to paint them with high-quality materials. Most people seek a DIY painting guide for custom kitchen designs, and this article provides every essential information that anyone will need to paint kitchen cabinets.

What You Will Need to Paint Kitchen Cabinets?

There are different practical types of tools available for making cabinets. However, you will need a few essential ones to paint your kitchen cabinets, including:

  • Screwdriver
  • Marker
  • Painter’s Tape
  • Sponge
  • Heavy-Duty Cleaner (All-Purpose)
  • Wood Filler (Optional)
  • Drill
  • Sand Paper or Sanding Block
  • Vacuum With Brush Attachment
  • Tack Cloth
  • High-Quality Primer
  • Paint Brush

Cabinets Painting Process (Step By Step)

The cabinet surface people repaint determines how they should approach the job. If the kitchen cabinet door designs are slab or flat, the painting process is more straightforward. In the case of having cabinets with raised panel doors, the painter should put more effort into creating better finishes.

If you want to paint kitchen cabinets properly, it is better to follow the following steps. It is essential to complete every step entirely and precisely.

Step One

Start the kitchen cabinet painting by emptying the boxes. Then unscrew any of the kitchen cabinet doors, and remove the drawers. Label and mark where each component goes with a painter’s tape and marker. To do so, put the painter’s tape in a safe spot, including where the hinges were attached. If reusing the hardware, always mark it in and store it in a bag or storage.

Step Two

The second step to paint kitchen cabinets is to wipe down all the surfaces that need to be painted. The cleaning must be done with a sponge and a cleaning substance that strips down any wood material of grease and dirt. One of the wood cleaning substances you can use is TSP-PF all-purpose, heavy-duty cleaner, perfect for Plywood and MDF kitchen cabinets.

Step Three

Some homeowners plan and prefer to replace the kitchen cabinet hardware such as the pulls or knobs with new ones. In such cases, it is essential to fill the holes that exist from the old hardware with a wood filler and then leave them until they dry completely. Then, drill a new pilot hole with precision and sand the wooden exterior part. It is better to vacuum any dust using a brush attachment to have a more clean workplace. Wipe the kitchen cabinets with a tack cloth.

Step Four

Step four of painting kitchen cabinets is priming all the wood parts with steady strokes. Remember to choose the direction equivalent to the wood grain while working in long.

Step Five

This step is about taping off the kitchen cabinet shelves edges and any wood material existing in your product with the painter’s tape. Then paint the cabinet’s interior and shelves with the preferring color and material. Wait until the paint is entirely dry for further procedure.

Step Six

Now, it is time to paint the kitchen cabinet doors, drawers, and frames with a color that contrasts with the paint used for the interiors and wait for it to dry.

Step Seven

The last step is to reinstall all the cabinet doors, drawers, and hardware. Follow all the marks and labels you put on your cabinets to install everything with the best result.

Note for Sanding: If the old kitchen cabinet surface is in an acceptable condition, you will not need to sand the doors and the exteriors down to bare wood material. All you need to do is rough the surface to allow the paint finish to adhere better and quicker. If you do the sanding, you should remember to feather the edges of the sanding area to enable the paint to lay flat on the surface.

Note for Painting: It is essential to apply primer-sealer to all the surfaces before painting. It is possible to do this with a spray, roller, or brush on flat surfaces.

Raised Panel Cabinets vs Shaker Cabinets

Raised Panel Cabinets and Shaker Cabinets

The style of kitchen cabinets defines the tone for the appearance of the rest of the area. Kitchen cabinets make up the bulk of any home, typically filling two or more walls while offering functionality and aesthetics for the room. Various types and designs are available to allow interior designers and clients to create beautiful kitchens for their homes. However, two of the most popular styles are raised panel kitchen cabinets and shaker cabinets. Both can be found in different wood species and paint finishes, and they will give the kitchen a beautiful look. This article outlines the primary differences between raised panels and shakers so that clients can make better decisions for their kitchens.

Shaker and Raised Panel Cabinets Style and Appearance

The most significant difference anyone can find between shaker and raised panel cabinets is in their appearance. Raised panel kitchen cabinets are one of the most traditional designs available suitable for classic kitchen designs. Although there are different types of raised cabinet doors, generally, the cabinet is made up of a centerboard and an external overlay or rim. The design creates a unique effect that makes a cabinet look like it was carved out of a large and single plank providing decorative style for the kitchen.

On the other hand, shaker kitchen cabinets are simpler than raised panels. They consist of a centerboard and an overlay around the edges. However, the edges are minimalist and plain in design. There are no decorative raisings in either the panel or the overlay. The center panel is flat, similar to slab kitchen cabinet doors.

Note: On the whole, raised panel kitchen cabinets are suitable for people who want to have traditional settings, while shaker cabinets tend to be more contemporary in style and design.

Installation Process

Both raised panels and shakers refer only to the design and style of the kitchen cabinet doors and drawer front. Both cabinet door types come in frameless or framed constructions with semi or full overlays. If the kitchen cabinet manufacturers construct them simultaneously, the installation process between these two cabinet styles will be identical.

Framed or Frameless Cabinets Construction

Kitchen cabinets boxes styles for both raised panels and shakers are divided into two primary classes, which are framed and frameless. Framed kitchen cabinet doors feature a supporting frame around the front section of the box, and the frameless style does not utilize a supporting structure. Constructing frameless kitchen cabinets is easier, resulting in more money savings. Frameless doors have a more sleek and contemporary design and are perfect for modern kitchen designs. On the other hand, framed kitchen doors are better for a traditional appearance.

Shaker and Raised Panel Cabinets Costs

Generally, shaker cabinet doors tend to cost less than raised panel doors. The kitchen cabinet’s price is determined by its box construction, wood species, and finishes. The manufacturing and labor cost for building interior doors and kitchen cabinets differs based on style. Thus, shaker cabinet doors are less expensive.

Availability

Both cabinet types are readily available in the market. However, due to the simple construction method and design of shaker cabinet doors, these products are more widely available. Moreover, most frameless kitchen cabinets designers and producers tend to make more modern styles, while most framed style cabinets are appropriate for traditional style kitchens. However, both types are famous depending on the region, and they can be found in stock and a particular order from various kitchen cabinets manufacturers.

Raised Panel Cabinets and Shaker Doors Maintenance Requirements

The maintenance requirements and process on both raised panel cabinets and shaker cabinets are the same. These cabinet doors tend to collect grime and dust along the edges of the primary board. This issue is slightly more pronounced in shaker cabinet designs, depending on the size of the lip on the overlay. However, both styles will need precise cleaning to maintain their beauty.

Raised panel cabinets and shaker doors can be installed in various heights, including reaching the ceiling. However, raised panels can use molding between the kitchen cabinet and the top to keep the costs down. In this case, the molding will fill the gap and prevent rust absorption. On the other hand, shaker kitchen cabinets do not feature molding, and the gap between the boxes and the ceiling can collect a considerable amount of grime, which may increase the maintenance requirements.

Resale Value

The kitchen cabinet style impacts the value of a home, less than the quality of the renovation products homeowners choose. The kitchen’s solid materials and furniture, which keep the rest of the house, will have the most significant impact. As long as the style of the cabinets is not damaged and is in keeping with the rest of the interior designs, the kitchen cabinets will not impact resale value.

Kitchen Cabinets: Everything to know (guide)

kitchen cabinets how to guide

Kitchen Cabinets alone can define any home’s interior and kitchen style. However, appearance and aesthetics are not the only things to consider when buying cabinets. Construction methods and materials used to produce these practical interior elements are also essential factors. This guide will help you make the perfect choice for your next kitchen application. 

Kitchen Cabinet Types and Construction Methods

Generally, three types of kitchen cabinets are commonly used in most current homes: wall cabinets, tall cabinets, and base cabinets.

  • Wall Cabinets: These cabinets hang on the wall system and do not touch the floorings. They come in various lengths, and the standards depth is between 30 to 45 centimeters. Additionally, they are installed 45 centimeters above the cooking table or work surface and 135 centimeters above the flooring. 
  • Tall Cabinets: These cabinets are created to cover a section of a wall in the kitchen and are generally 215 to 240 high and come in various depths depending on the kitchen layout’s design
  • Base Kitchen Cabinets: If there is a need for countertop support, base cabinets are the best. Their standard height is around 86 to centimeters and comes in 30 to 45 centimeters depth. 

Within these main kitchen cabinets categories, these elements are either prefabricated (stock), semi-custom or custom. When creating custom kitchen or renovating the place, determine the money you want to spend on cabinets and how essential aesthetics and durability are. 

  • Stock Kitchen Cabinets: They are available in pre-assembled designs in most home improvement and kitchen stores. Additionally, they feature standard sizes. The advantages of stock products include being economical, having a shorter lead time, being ideal for lower-budget projects, and being made in standard heights. However, there are a limited choice of configuration and finishes available for this particular type.
  • Semi-Custom: Cabinets that are semi-custom come with standard dimensions. Different materials, such as MDF kitchen cabinets and doorsare available for them that offer more personalized options. They are the perfect choice for mid-range budget projects. However, the delivery time can be longer than stock-cabinets due to the custom functionalities and designs.
  • Custom Designs: The trend for kitchen cabinets push people to opt for custom designs. Kitchen designers produce them according to the client’s demands and taste. Advantages of custom designs include a wider choice of materials, finishes, styles and are generally made from higher quality materials such as MDF and Plywood. However, they are more costly than other types.

Features of Wood Kitchen Cabinets

When buying kitchen cabinet for interior renovations, it is essential to know their features and components. Here are the primary parts of cabinets you should know.

Face Frame of Kitchen Cabinets

Cabinets often have a frame around their front box made from the same materials as the kitchen cabinet doors and drawers. The frame is used to stabilize the box, and the hinges are attached to the structure and are visible. However, some manufacturers make frameless kitchen cabinets that are more contemporary designs.

Sides

The cabinet sides are usually unfinished and made of different materials, including particle boards, MDF panels, and plywood. One of the advantages of MDF kitchen cabinets is that they are less expensive and susceptible to water damage.

Back Panel and Bottom of Kitchen Cabinets

This part of the cabinet is used to support and ensure the stability of the product. Cabinet suppliers produce the back panel and the bottom with different thicknesses.

Kitchen Cabinet Doors

There are various styles of kitchen cabinet doors, including slabs, raised panels, and flat panels. Each class has its unique characteristics and can be used for a particular interior design. Due to the area’s humidity, it is better to opt for MDF doors that are less likely to warp or lose their paint finish when exposed to moisture. 

Drawers

It is essential to consider the drawer’s construction and its durability. Check if the sides of the solid wood drawers feature suitable thickness equivalent to the needs. Even though wood drawers are the popular choice, some manufacturers create models with metal materials that are perfect for frameless cabinets.

Shelf

Kitchen cabinet shelves are available in pull-out and fixed systems and are often made from MDF or plywood. They feature additional coatings such as laminates and wood veneer.

Toe Kick Section

The recessed section for feet is called Toe Kick in cabinets. They allow occupants to stand closer to the countertop and prepare a meal with comfort. Components such as central vacuum or additional drawers can be applied to this particular section.

Conclusion

There are other components of kitchen cabinets that you can choose them equivalent to your taste. They will increase the aesthetics and will create more attractive designs for the cabinets. These components are decorative moldings, knobs, and hinges. For choosing the best style, it is better to consult with manufacturers or interior designers.

Buying Interior Doors Guide

buying interior doors

Whether you want to replace broken or worn interior doors, remodel or enhance the home’s interior, new beautiful doors offer a refreshing difference. This article will help you choose a suitable door for your next project to complement the interior decor.

Things to Know Before Buying Interior Doors

Before buying new interior doors, there are a few essential things everyone should keep in mind, which are:

  • Door Type
  • Measurement and Size
  • Handing

Generally, there are two main types of interior doors: pre-hung doors and slab interior doors. The pre-hung type includes a frame-mounted door with hinges, and it is ready to be installed and used with a prepared doorway. On the other hand, slab doors feature a basic design that does not include a frame, handles, or hinges. Slab doors suppliers paint or finish them to create a more eye-catching style.

Doors measurement and openings are crucial when replacing or installing a new interior door. Always opt for a door that has the same dimension as the existing one when replacing a door. For slab doors, you should measure the height, width, and thickness of the current product.

Interior door handing or swing is essential for door hardware and placement. To determine the handing, stand on the outside section of the door and see what type will be suitable for that particular door. If the hinges are on the left area, the handle should be placed on the left to create a left-handed interior door. It is the same for right-handed interior doors that have hinges on the right side.

Available Door Materials

Manufacturers use different materials to produce interior doors, including solid wood, MDF, Plywood, etc.

Composite Material

One of the affordable doors is the molded composite product which is a wood compound, and it is designed to look and feel like natural wood. This door material is low-maintenance, and it will not fade over time.

Solid Wood

Solid wood is classified into different species. Each species has its unique qualities and looks. Hardwood doors are made from trees that are obtained from flowering plants. Another suitable solid wood material is knotty alder, versatile, soft, and small-knotted species that provide a rustic feel and rich tone. Knotty pine is a lightweight natural material that features a beautiful texture, tight knots, and straight grain.

Engineered Wood

Engineered wood materials are currently trendy due to their durable characteristics. MDF interior doors and hardboard are the best examples for this class. MDF doors are available in various sizes, and customers can choose them equivalent to their application’s requirements. These doors are resistant to insects and termites. Additionally, MDF doors feature smooth surfaces, allowing manufacturers to utilize various coating substances according to customers’ tastes and demands. There is another type of wood which is known as PVC, that stands for Polyvinyl Chloride. These door types are durable, water-resistant, and fire-resistant and come with various color finishes.

Flush or Panel Interior Doors

Interior doors have another classification which is Flush doors and Panel doors. Flat-panel doors (flush) feature flat, plain surfaces on either side of the product. They are hollow or solid core and create elegant lines to complement the interior decoration. On the other hand, panel doors are popular due to their style and beauty. They feature vertical frame elements and rails with panels. Raised panel interior doors are one of the common styles of panel doors.

Core Designs and Types

There are generally two types of core designs for interior doors: hollow core and solid core. Open core doors are inexpensive, lightweight, easy to install, and a perfect choice for most homeowners who want to renovate their homes with a lower budget. They are suitable for kitchen cabinet doors, bathrooms, and closets. However, the only problem hollow core interior doors have is not offering high-quality sound insulation. On the other hand, solid core type doors are more robust, heavier, and provide better sound blocking than hollow ones. Additionally, solid core doors are better looking and are perfect fire-resistant products.

Hardware for Doors and Cabinets

When it comes to choosing hardware for interior doors, you will have a wide range of choices, from the hinges and finishes to locks and more. If the doors do not require latching and utilize push and pull features, decorative dummy knobs and handles are a perfect choice. A door that doesn’t require lockings, such as hallway doors and custom closet designs, knobs are easy to install and come in different functional styles.

How We Make Drawer Box for Your Kitchen Cabinets (part 2)

making kitchen cabinets drawer box

The kitchen is the heart of any home, where occupants and guests gather around to enjoy their time and meal. Thus, interior designers focus on creating aesthetics and a warm feeling for the area with different elements. Kitchen cabinets are the essential factor when renewing and decorating the space equivalent to the house’s overall design. However, many people consider how manufacturers and carpenters make custom kitchen cabinets. One of the components of kitchen cabinets is their drawer box which should be functional while satisfying the aesthetic needs.

Manufacturers utilize various methods for making the drawer box for kitchen cabinets. In the first part of the article, we discussed the standard tools for making kitchen cabinets, materials used for the purpose, and measuring the width and height of the drawer box. This article provides more information about the production process.

Depth of Kitchen Cabinets Drawer Box

Determining the depth of the kitchen cabinets drawer box is more complicated than defining other dimensions. For getting the most practical use of the products, the primary driver for the depth is the size of the glides to use. Experts choose the depth for providing the occupants with the full advantage of the extension feature. However, the size of the slides should be equivalent to the cabinet construction and the size.

Carpenters measure the inside depth of the kitchen cabinets where the drawer box should be installed. They do the measurements by sizing the back of the cabinets to the front section. If the products have overlay sections, where the box front sits in the front of the cabinet’s body, it is essential to measure the depth of the products and look for slides that are slightly shorter than the measurements. The dimensions of the slides determine the length of the outside depth. If the kitchen cabinet design requires inset drawers, where the box’s fronts should be installed flush with the front of the cabinet, then carpenters account for the thickness of the drawer front.

Drawer Box Sides, Front, and Back Length

After determining the outside dimensions of the kitchen cabinets drawer box, it is time to figure out the length of each part that makes up the external perimeter of the product.

  • Drawer Box Sides: The drawer box sides’ length is simply the product’s overall external dimensions.
  • Box Front and Back: The front and back of the drawer box fit between the sides, so they need to be shorter than the outside width. For determining the front and back length, carpenters take the overall exterior width of the box and subtract two times the thickness of the side sections. This measurement will vary depending on the material used for the kitchen cabinets, whether it is plywood or MDF panels (medium density fiberboard). It is essential to verify the thickness of the MDF panels with special tools.

Layout and Cutting Sides, Fronts, and Backs

Manufacturers always mock up the wood cutting process and plan before starting the procedure to reduce waste as much as possible. Using one more minor MDF panel for creating raised panels or flat panel doors for kitchen cabinets and drawer boxes can reduce the cost. Most carpenters include the cut width in the plans and do not wind up short pieces.

Generally, kitchen cabinets drawer boxes look better when the length of the piece follows the wood’s grain which is why carpenter’s layout the side sections along the longer end of the MDF panel. It is better to make the rip cuts first and then trim them to length using cutting tools such as a miter saw or table saw. It is essential to make sure there are a few centimeters at the end of each ripped section if there is a need to extend the length of any components.

The bottom section of the kitchen cabinets drawer box fits into the groove or dado cut into the bottom of the side, back, and front pieces. It is essential to note that it does not get glued into the place but rather floats in the dado to allow the material’s expansion. The table saw is the most practical tool for doing the cutting accurately. Cutting MDF panels is also possible using a circular saw, and the cut should be guided with a router. For people who prefer doing the DIY job, using a circular saw and guide will be efficient.

Assembling Kitchen Cabinets Drawer Box

After doing all measurements and cutting, manufacturers start the assembling phase of the kitchen cabinets drawer box. This stage involves drilling four pocket holes on the back and front pieces using a suitable jig. The holes must be drilled on the opposite side of the dado cut. Drilling the holes over the dado will damage the box, and spots are required for larger drawers applying additional pockets. Once the holes are ready, the box must be screwed together. Then the bottom section is installed on the box with screws and glue. The assembly is finished by applying different coats for further protection.

How We Make Drawer Box for Your Kitchen Cabinets? (Part 1)

drawer box for your kitchen cabinets

Kitchen cabinets are the essential components when constructing or renewing custom kitchens for developing aesthetic interior designs. These products contain various elements that complete their functionality. The drawer box is one of the crucial parts of the kitchen cabinets that allow occupants to use their storing products more functionally. Manufacturers utilize various standard methods for developing the drawer box. However, the construction procedure can seem daunting for non-experts. But there are only a few straightforward measurements to take for getting the correct dimensions. We utilize pocket holes joinery, MDF panel materials, and suitable hardware to make a drawer box for your kitchen cabinets more accessible.

Materials and Tools

Most kitchen cabinets are made from wood products such as MDF panels and plywood. We use the primary material for the sides of the drawer box. Additionally, using tempered hardwood or MDF material is suitable for the bottoms. When making a drawer box for your kitchen cabinets, we usually utilize eight pocket hole screws per box. However, the number of pocket hole screws varies depending on the size of the kitchen cabinets our customers demand.

The equipment is almost similar to the tools needed for making a cabinet.

We utilize the standard carpentry tools and modern devices such as CNC routers for cutting cabinets. However, the primary equipment required for making drawer box are as followed:

  • Table saw, or circular saw featured with a guide for cutting the MDF panel.
  • Router, circular saw, or table saw with directions for cutting dados.
  • Miter box or power miter saw for cutting to length (table saws are also suitable for the purpose).
  • Jig for creating pocket holes
  • Mechanical or Electrical drill
  • Simple tape measure
  • Straight edge

Kitchen Cabinets Drawer Box Construction Overview

Before getting into the drawer box making details, it is essential to know the typical kitchen cabinets drawer construction. There are various methods of building these products for the kitchen, and some require special equipment and skills while others feature simple processes and are not very attractive. Using pocket hole joinery creates a balance between appearance, cost, ease of build, and strength for the products. Thus, most carpenters and kitchen cabinet manufacturers utilize this specific method.

The kitchen cabinets drawer box consists of six primary components: the box sides, front and back, bottom, and exposed drawer front and pull. We utilize two wood screws for securing the drawer box front to the frame, and two machine screws hold the product pull in place. The eight pocket holes and screws which attach the front and back to the sides are not visible. Furthermore, the bottom section is placed in a groove (dado) cut into the sides, back, and front areas.

Choosing Wood Material for Kitchen Cabinets Drawer Box

Before starting the creating process, we determine the type of wood the cabinet design will require for the drawer box sides and bottoms. There are different suitable wood materials for the purpose: solid wood boards, MDF panels, melamine coated particle boards, and veneered plywood. Due to the drawer’s abusive tendency, using MDF panels for kitchen cabinet construction is better as they are durable and versatile. Solid woods are also very durable, but they are much more expensive than other materials. Using tight, closed grain, and light color materials are trendy in 2021 for kitchen cabinets.

We choose the box side thickness equivalent to the strength needed for the customer’s use. For making the bottom area, solid wood panels are not commonly used due to their price. MDF panels and boards are good enough for most kitchen cabinets drawer boxes. However, tempered hardboards are also practical and come in a dark brown hue but are not as attractive as modern MDF or plywood. This particular wood material is strong enough for bottom sections and is easy to find at a lower price than MDF panels or plywood.

Drawer Box Width and Height for Kitchen Cabinets

We use two primary factors to determine the outside width of the drawer box: the width of the opening for installing the box in and the side clearance for slides. It is better to measure the space after constructing the kitchen cabinet carcass. We calculate the front and back for knowing the tolerance of the slides. Then, for determining the outside dimension, we take the inside opening dimensions and subtract two times the clearance at the sides.

When the height of the opening is constrained, we measure the actual dimensions after the carcass is ready. Additionally, we calculate both sides and allow proper clearance for the top and bottom of the drawer slide. On the other hand, for non-constrained height, we use a shorter box height than the front section. For cases in which we need to install drawers into a kitchen cabinet with no separate opening for individual boxes, such as the bottom area of a European raised panel cabinet, we use this technique.

In part two of this article, we will get into more details of constructing drawer boxes for kitchen cabinets.

How to Reface Kitchen Cabinets?

Reface Kitchen Cabinets

Kitchen Cabinets are the essential elements of every home’s kitchen and interior that affect the area’s overall appearance. Thus, interior designers and homeowners give special attention to their kitchen cabinets as they know it will change the feel and vibe of their applications. These particular area elements can get damaged, warp and scratch over time if they are not made from durable wood materials such as MDF panels. This is when homeowners should replace or reface kitchen cabinets.

Most people think they should replace their old or damaged kitchen cabinets with new ones, costing them a considerable amount of money. However, there is a sufficient explication for eliminating unwanted kitchen cabinets, refacing them with particular techniques. The method this article introduces is a DIY technique to reface kitchen cabinets with only simple tools, which are as followed:

  • Screwdriver (4-in-1 will be more helpful during the refacing process)
  • Brand nail gun for more stable fixture creation
  • Caulk gun
  • Circular saw (other says are also practical but may be challenging to reface kitchen cabinets with them)
  • Cordless drill
  • File
  • Different drill bits
  • Slitter (laminate can be functional)
  • Miter saw
  • Paper cutter
  • Other carpentry tools equivalent to different wood materials

Overview

Refacing kitchen cabinets is an easy, quick and straightforward way of changing the look of the interior without causing mess and expense of an entire remodeling project. The process primarily covers the cabinet face frame with different surfaces depending on the kitchen’s overall design. The new surface can feature raised panels kitchen cabinet doors as most modern designs utilize this door type. After choosing the best cover, replacing the old doors and drawer front with new products is essential. To reface kitchen cabinets, homeowners will spend about one-third of what new cabinet systems would cost. Giving attention to details and having some experience with tools is required to reface kitchen cabinets by yourself. However, it does not require master-level experience in carpentry. The only skill which is essential for having the best results is to measure and cut accurately.

Steps To Reface Kitchen Cabinets

The process of refacing kitchen cabinets involves doors and drawer removal and covering the front edges of the products with peel-and-stick wooden materials. Then it requires hanging the new doors with cup hinges which are easy to adjust and install. Attaching new kitchen cabinet surfaces to the existing drawers and finishing the process with molds, replacement, and new hardware installation is the last step. However, there are other things to do to reface kitchen cabinets with the best quality.

  1. Most original cabinets in the kitchen are basic and entry-level. It is essential to consider the uniqueness and the future design of the kitchen before starting the refacing process.
  2. Choose the color and the material, whether it should be MDF panel or plywood precisely. After choosing the materials for the cabinet refacing, be careful with finishes as they should match the kitchen’s appearance.
  3. The third step is the most critical stage in which measurement is done. Measure the dimensions of the kitchen cabinet precisely and write them down to remember.
  4. Choose a suitable cup hinge if an inset or lip door is converted into overlay doors for the refacing application.
  5. For sizing the door, defining the extending part past the face frame is required. This step is to overlay distance measurement. There are various practical hinges available to choose from for this step. However, the extra door width can cause issues. Thus, it is crucial to carefully measure inside corners and between the doors to ensure that there is enough space.
  6. Measuring inside corners with or without rotating shelves is often challenging. Use a scissors-hinged door, a pair of hinged doors that can be practical to reface kitchen cabinets. However, the easiest way to know the dimension of the inside corner is to ask the cabinet door supplier for help figuring the sizes and double-check the measurements or calculations before refacing the kitchen cabinets.
  7. Sand the corners of the cabinets for refacing preparation. Since this step can create dust, it is better to empty the cabinets and remove the doors by unscrewing the hinges that fix the opening to the face frame.
  8. After preparing and cleaning cabinets, it is time to transform the kitchen cabinets by installing the end MDF panels. If the face frame overhangs the existing panel, it is essential to add a filler for creating a flush surface.
  9. Measure and cut the end panel to size to fit the front edge with the surface of the face frame and then install the MDF panel with construction adhesive or few brads.
  10. Cut corners in the requiring sizes and bond them by pressing them with tools. The pressure direction must be from top to bottom at the edges, and it should be firm enough to make it stable.
  11. Hang the door by lining up the center of the hinge and drill a hole. Attach the bottom and top hinges by driving a screw through them into the stile.
  12. Align the drawer box with the previous measurements and drive screws through them into the front face. Check if the screws didn’t go through the face of the new refaced kitchen cabinet.
  13. Finish the procedure by installing cove molding along the MDF panel wall in the kitchen cabinets and cover the toe-kick with a thin strip of wood finished to match the rest of the cabinets.

What is the Trend for Kitchen Cabinets in 2021? (Part 2)

Trend for Kitchen Cabinets in 2021

The trend for kitchen cabinets in 2021 is pretty impressive for people who prefer to create a modern-looking kitchen for their houses. Interior designers describe kitchens as the heart of any home where occupants and guests spend their time enjoying food and gatherings. Thus, creating aesthetics for this area is a must-do for every homeowner. Custom Kitchen cabinets with various materials, including MDF panels (Medium Density Fiberboard Panels), plywood, hardwood, etc., are elements designers utilize to enhance the area’s beauty. Furthermore, leaving out the kitchen cabinet doors when renovating the place is not a wise choice. Knowing the trend for kitchen cabinets in 2021 will help homeowners create better-looking and sleek areas for eating and hanging out.

As told in part 1 of this article, drama is the trend for kitchen cabinets in 2021. We discussed various design trends and their unique characteristics. Some of the most modern designs in 2021 include Slab door kitchen cabinets, transitional cabinets, open frame systems, etc. Additionally, currently, people are looking for assorted door designs such as raised panel doors which are also very trendy. However, other factors are left to discuss: the trend for kitchen cabinets in 2021 from a color and layout perspective.

The Color Trend for Kitchen Cabinets in 2021

In classic kitchen designs, interior designers used stained natural wood cabinets, which is not the case in 2021. Currently, custom-cut kitchen cabinets and doors are including in colors. As stained wood designs are still popular, more people prefer adding pops of hues and colors to their kitchen. Cool-toned products are the trend for kitchen cabinets in 2021, including grey, blue, green, and two-toned hues. The followings are the best colors to choose for kitchen cabinets this year.

  • Blue: The main characteristic of this color provides a classic, cool and light look for the cabinets. Most blue kitchen cabinets are not cerulean but rather a grey-based navy, making them more neutral for the area. This color also provides a requiring contrast for stark white kitchens and can create a slightly darker feel. Additionally, these are a great look for people who want to create a more relaxed area for their homes.
  • White: Cabinets with a white finish are modern, sleek and tend to brighten or open up a place that might otherwise seem dark or small. White kitchen cabinets pair perfectly with most of the popular designs. Moreover, kitchens with white cabinetry involve better flexibility with their plans and dress up areas with a high-end appearance. White colour products continue to be the trend for kitchen cabinets in 2021.
  • Green: Popular home improvement projects have shown that green kitchen cabinets can considerably enhance the area’s beauty. Olive green cabinets are trendy in vintage and contemporary kitchens as they can be a reminder of the 70s while keeping the place light and airy. Designers prefer to utilize emerald green for trendy kitchen cabinets to create more dynamics and a dramatic feel.
  • Two-toned: Kitchen cabinets with tow-toned color often feature a white upper section paired with a darker base area. For lower hues, greys and blues are suitable, but canary yellow, dark purple and mint green are also practical.
  • Gray: One of the trendiest colors used in interior designs in 2021 is grey. This hue is a perfect alternative for those who prefer neutral colors but are not fans of an extreme industrial appearance.
  • Natural Wood: Most people love the rustic yet industrial look, and for those who want to bring natural elements inside, wood products with natural textures for cabinets is a perfect choice. Similar to grey kitchen cabinets, the wood can create a dramatic yet modern vibe for the interior.

Best Kitchen Layouts in 2021

Using the best trendy kitchen cabinets in 2021 without having a perfect layout design is useless. Thus knowing a few of them will help homeowners in their projects. The most popular kitchen layouts include:

  • The one wall.
  • Gallery layout.
  • L-shaped and U-shaped kitchens.
  • Island kitchen layout (very trendy in 2021).
  • The peninsula.

However, they are two other kitchen cabinet layouts that are currently very popular.

Mixed Cabinet Styles: This kitchen layout makes the area feel larger and provides an eye-catching element for the place. Its upper section features open-concept systems, and base cabinets have entirely different styles, such as slat cabinets. Moreover, this layout is popular in industrial and rustic style homes which is very trendy in 2021.

Floor-to-Ceiling Cabinetry: This layout is the perfect solution for the best use of kitchen space. It provides storage for all dishes and can be a suitable way to manage a part of the pantry. Having a floor-to-ceiling system will make the room feel taller. Additionally, it allows for cabinetry size variations and creates a unique design element for the home. However, this layout is more practical for larger kitchens.

What is the Trend for Kitchen Cabinets in 2021? (Part 1)

Trend for Kitchen Cabinets

Kitchen cabinets are essential elements of every home’s interior when creating a more appealing kitchen for occupants and guests. Most homeowners remodel their interior with beautiful and new tiles and vinyl floorings and then find out their kitchen cabinets look outdated in comparison. Thus, it is crucial not to leave out the kitchen cabinets and doors when considering having a renovation. Whether the plan is to paint or replace them, knowing the trend for kitchen cabinets in 2021 will help the homeowner create better aesthetics for the home. This article provides information about the tendency for kitchen cabinets in the current year. It will let you know which designs will rise and stick around for a more extended period.

The top trend for kitchen cabinets in 2021 is drama. Almost everyone tends to make their kitchen a statement as they see this area as the interior hub. Incorporating larger kitchen islands layouts is growing day by day, which is well known for its better storage and seating area. Most of the customers opt-out of traditional kitchen cabinets and prefer using open shelving to showcase the dinnerware. Additionally, interior designers mix and match different materials such as MDF and other woods for the same kitchen. In traditional designs, there was a limit in creating new styles due to the limited contrasting colors. However, in 2021, people are venturing into assorted door designs, including shaker and raised panel doors and wood tones or paint finishes.

Design Trend for Kitchen Cabinets

There are many trendy kitchen cabinets, and customers should not worry about the previous style limits. It used to be about hiding supplies and tools in the cupboards, but this is no longer the case. Light and bright hues are taking over the interior decoration trends as white color. More designers prefer to utilize sleeker and modern kitchen cabinets such as industrial looks and shelving. However, in 2021 it is common to find varied modern and traditional kitchen cabinets designs, creating aesthetics and a warm feel for the interior.

Slab Door Kitchen Cabinets

One of the most modern and sleek products is the Slab kitchen cabinet doors. Some of these trendiest designs do not feature handles or knobs, have frameless and flat fronts, and come with more glossy finishes. However, carpenters develop slab doors with wood finishes for customers who prefer more traditional looks for their interior. This design is considered minimal, and using them is a suitable way to modernize a kitchen or small portions of a house. Along with using slab doors for creating a modern appearance, it is recommended to complete the look with a backsplash or wood-look floor.

Transitional Cabinets

Transitional kitchen cabinet designs can be a subjective and confusing term, and the style mixes new and old looks that make these products very extraordinary. Manufacturers and carpenters modernize and update traditional kitchen cabinets by pairing them with modern components to produce a transitional design. However, this particular design for trendy kitchen cabinets features more conventional styles and consists of contemporary hardware. Additionally, they can accommodate shaker cabinets as well as open frame display products. Utilizing transitional products is the perfect way to have a more classic look in the kitchen without looking outdated. Many experts say these designs will be more prevalent in remodeling projects for 2021 than in newly built homes. The good thing about this type is that they can be made from MDF panels and other wood materials or even metal substances.

Reclaimed Trend for Kitchen Cabinets

Reclaimed Kitchen cabinets are the trend for homeowners who want to remodel their kitchens on a budget. For home remodeling plans, it is common to see the renovators redo the current products instead of springing for custom kitchen cabinets to save money, which is the primary reason for designing these particular systems. The concept is straightforward: revamping used products to make a more current look instead of purchasing a brand-new system. This will help homeowners to spend their money on other renovation parts such as floorings. Additionally, this inclination is considered eco-friendly as people are recycling cabinets with this method. As long as the trend for kitchen cabinets in 2021 needs a reclaimed system due to the current conditions, it will stay in the market for a longer time.

Open Frame Cabinets

Open frame cabinet doors are the middle-ground between traditional cabinets and open shelving. Most of these products feature glass panels to display items inside the cabinet. This design is suitable for kitchens with brighter and lighter colors as the illusion of open spaces can enhance the openness of more prominent and more luminous interiors. Depending on the overall design of the area, open frame kitchen cabinets can look modern or traditional.

Constructing Frameless Kitchen Cabinets (Part II)

Constructing Frameless Kitchen Cabinets

Constructing Frameless Kitchen Cabinets is a popular carpentry process for creating practical products for the interior. These products have modern, functional, and European style designs that can improve the house’s aesthetics and interior decoration. However, their design’s main functionality is for the kitchen. Manufacturers and carpenters produce these modern works with various wood materials, including MDF panels and Plywood.

Constructing frameless kitchen cabinets requires years of practice and experience. However, many people want to create their kitchen cabinets with MDF of other wood materials without hiring professionals. Thus, we decided to provide the required information for constructing frameless kitchen cabinets for such people. In part 1 of producing frameless kitchen cabinets, we discussed the basics of the carcass of the cabinets and the base options that the product can have. Thus, this part will provide more information about the process, including the frameless kitchen cabinets back options, tools for making them, and precise steps to complete the production of these functional materials.

Kitchen Cabinets Back Options

When constructing frameless kitchen cabinets, the cabinetmaker has some practical options for creating the back section of the product. Each method and option have exceptional stability and functionality.

  • Full Back: Carpenter can choose to make a full back with the same MDF panels or Plywood used for the kitchen cabinet. This configuration will provide an enclosed product with excellent strength, which is essential when installing heavy countertops or supporting heavy appliances. However, this method can be costly, but the carpenter can lower the expenditure by precisely planning the cutting method with a CNC router.
  • Nailed Back: Some people don’t mind if their cabinets have a back part or not. The nailed back option is the best for saving more MDF panels and other materials. Instead of having a full back, this method features creating two nailing strips out of the MDF panels for the top and bottom of the back, so there is a point to affix the kitchen cabinet to the wall and provide strength and rigidity to the product.
  • Economic Nailed Back: In some cases, people prefer to have an enclosed back system, but they also want to save money. Thus, it is better to use nailery as the previous method and utilize a piece of MDF panel on the back of the kitchen cabinet to provide a finished look. In addition to the lower cost of this method, it also provides a lighter product.

Tools and Materials Needed for Constructing Frameless Kitchen Cabinets

Like producing any other products, some essential tools and materials should be available for constructing frameless kitchen cabinets.

Tools: There are various tools available for making a cabinet that carpenters should have. However, the essential ones are table saw or circular saw while having a guide for making accurate cuts in the material. Other tools that can be practical are jig types and combination squares.

Materials: Experts always recommend using MDF panels or Plywood materials for both interior doors and kitchen cabinets. These materials come with different appearance grades and can accept various finishes. When using MDF panels, it is better to glue the joints and utilize appropriate pocket screws.

Steps of Constructing Frameless Kitchen Cabinets

Constructing frameless kitchen cabinets for different trendy layouts requires some essential steps. These steps will help cabinetmakers to achieve the best results for their kitchen cabinets.

  1. Calculating Kitchen Cabinet and Component Dimensions: The dimension that the cabinet maker needs for creating kitchen cabinets is the height, depth, width, component dimensions, bottom dimensions, shelf size, back and back dimensions, stretchers and sub toe kick measurements. The application determines the product’s height, and the depth has standard numbers, including the kitchen cabinets door. The cabinet depth is also equivalent to the preferences. The other dimensions are all depending on the first measurements. However, it is better to consult with professional cabinetmakers for better measures.
  2. Attaching Side To Back: This step starts with applying edge banding to the front of both kitchen cabinets sides. Then drilling pocket holes around the top and sides of the product’s back is necessary to attach it to one side.
  3. Attaching Bottom: Next step involves applying edge banding to the front of the bottom section and drilling pocket screw holes for connecting the bottom to the side and back section of the cabinet. Using a square is essential to make sure the alignments are appropriate.
  4. Fixing Other Side: Now it is time to settle and attach the other side to the cabinet assembly utilizing the previously drilled pocket holes.
  5. Stretchers Attachment: Attach the edge banding precisely to the front section of the two stretchers and then drill pockets holes for attaching them to the cabinet. For the first drawer, the bottom stretcher on the front is utilized.
  6. Installing Sub Toe Kick: The sub toe kick helps support the kitchen cabinet and adds rigidity to the finished kickboard after the installation process.
  7. Drilling Shelf Pin Holes: The last step is to drill holes with a jig in the back and front of each side of the kitchen cabinet for shelf pins. After drilling, install the shelf by applying edge banding to the front of the frame and inserting its hooks in the appropriate locations.