Kitchen cabinets often go through considerable changes over time. Changes in cabinets are mainly because of remodeling, repainting, and refacing that homeowners apply once in a while. Additionally, you may want to restyle your kitchen to suit the ever-changing interior decoration. Sometimes you will have to change the design of your cabinets to accommodate new equipment such as a refrigerator or microwave oven. So, whatever may be the cause, your cabinets will require some cabinetry cuttings to adjust with your kitchen design and bring uniformity to your home while providing more compact storage without buying a new one. Thus, we provided these kitchen cabinet cutting tips and guides to help you achieve the best results.
Cutting Kitchen Cabinet with a Practical and Convenient Method
Although replacing kitchen cabinet doors is an excellent way to upgrade your interiors, cutting your cabinets can save you money. Most of you may not know about kitchen cabinet cutting because the process involves adjusting the depth of the furniture. So, this guide mainly focuses on cutting the depth of a base cabinet, which is similar to cutting cabinets.
Kitchen Cabinet Cutting has Two Primary Parts
- Cabinet Resizing
- Resizing Kitchen Cabinet Doors to Fit the Shorted Body
Let us help you accomplish both tasks.
Resizing Kitchen Cabinets
Our kitchen cabinet cutting guide consists of nine essential steps to follow for best results. The cutting steps are:
You should remove all the securing screws from your cabinet wall using a simple screwdriver or a drill. If your kitchen cabinets have a removable shelf, you will have to remove them.
Use a pencil or a straightedge to outline the cutting line in all four sides of the cabinets. These cutting lines refer to where the saw blade will cut the furniture. Then, you should apply masking tape on the line to prevent the wood from chipping. Again, draw the cutline over the masking tape to better visualize it during the kitchen cabinet cutting process.
In this step, you will have to remove all screws from the kitchen cabinet face frame, mostly found inside the cabinets. Then, you should bump the cabinets off from the face frame with a rubber mallet.
Step four is all about adjustment. Adjust and position your kitchen cabinets with the table saw. Remember that the cabinet’s face should face up and then slide them on the right or left side to adjust the cutting blade with the cutline. Once you ensure the adjustment, lock the saw fence.
Push the cabinets through the blade to perform kitchen cabinet cutting on every four sides with a push stick.
Use a standard hammer to remove the cut-out pieces from the bottom, and with pliers, you can rip off the nails.
You should precisely measure the rail depth and cut it to adjust the depth of your kitchen cabinets with newly resized furniture. You will have to use a table saw and miter gauge for this step.
Remove the stiles and create two holes to readjust the rail with vertical stiles. Then apply glue on the holes and reattach the stiles and rails to the kitchen cabinets to secure them.
In the last step of kitchen cabinet cutting, you should apply strong glue on the cut-out furniture to provide better stability. You can use two clamps on either side of the kitchen cabinet so that it won’t decay. Once the glue is firmed, you will have to remove the braces for wall adjustment.
Resizing the Kitchen Cabinet Doors
Now it is time for the essential stage of your kitchen cabinet cutting process to resize your kitchen cabinet doors. Follow the necessary steps below, and you are good to go for kitchen cabinet cutting.
With a table, you should cut the kitchen cabinet door into two equal sections perpendicularly.
For adjusting kitchen cabinet doors height, you should remove all the screws from the door.
Use a table saw to cut through the height of the cabinet door against the fence.
Now, use a drill to create two vertical holes on the top half of your kitchen cabinet doors. Remember that the holes should have even positions.
Use a screw to secure your cabinet doors and reinstall all the hardware to adjust the doors properly with your new kitchen cabinets.
Lastly, place the cabinet back to its position.
If you prefer to buy a new cabinet set for your kitchen, make sure to read our kitchen cabinets buying guide.